Common Symptoms and Causes
| Symptom | Likely cause |
|---|---|
| No response to wall button or remote | Power, batteries or logic board |
| Blinking sensor lights | Blocked or misaligned safety sensors |
| Hums but does not move | Broken spring or stripped gear |
| Door reverses before closing | Sensor or force setting issue |
| Remote only works close up | Battery or antenna issue |
Safe Checks
- Check that the opener is plugged in and the outlet works.
- Replace remote batteries.
- Wipe sensor lenses and check alignment.
- Make sure the door is not locked in vacation mode.
- Pull the release cord and test the door by hand to see if it moves freely.
If the door will not move freely by hand, a spring or track issue is likely. See garage door spring replacement.
When To Repair or Replace
Simple fixes like sensors, remotes and circuit boards are repairable. A noisy, slow or very old opener may be better replaced. See opener repair and opener installation.
Frequently Asked Questions
Why does my opener hum but the door will not move?
A broken spring, a jammed door or a worn opener gear can cause that.
Why do the sensor lights blink?
Misaligned or blocked safety sensors usually cause it.
Why does my remote stop working?
Dead batteries, programming loss or range problems are common.
When should I replace the opener?
Frequent failures, noise and age are signs.
Need help now? Call (629) 654-6541 for same-day service in Franklin and nearby.